Camera/Lens Installation, Camera/Lens Wiring

6.5Camera/Lens Installation

1.Loosen the two screws holding the camera bracket to the base. It is not necessary to remove them completely. See Figure 3.

Camera

Bracket

Loosen These

Screws

Figure 3: Removing the Camera Bracket

2.Remove the camera bracket from the base. If you are using the feed-through feature, refer to Section 6.8.3 at this time.

Mounting fixed lens cameras in VSE-2300 and VSE-2400 Series Housings.

1.Attach the lens to the camera.

2.Use the 1/4-20 x 3/8-inch screw to mount the camera to the camera bracket. The lens should extend approximately 6 mm (0.25-inch) from the front of the camera bracket. See Figure 4.

Camera

Bracket

VSE-2400 Series:

3.Attach the lens to the camera.

4.Use the various 1/4-20 screws and spacers provided to mount the camera and the lens to the camera bracket.

6.6Camera/Lens Wiring

WARNING: Only use the cables specified under "INSTALLATION, Cable Requirements" for wiring of all cameras and lenses.

6.6.1Fittings

1.The two large 1/2-inch NPT fittings accept round cable with diameters from 4.3 mm (0.17-inch) to 11.9 mm (0.47-inch). The small fittings will accept cables with diameters from 4.6 mm (0.181-inch) to 7.9 mm (0.312- inch).

Be sure to securely tighten all fittings to ensure a liquid-tight seal. Failure to do so could allow water to enter the housing and damage the camera and lens.

If a sealant is to be used, be sure it is a neutral cure type. Sealants that release acetic acid may harm camera electronics.

Use of "drip loops" is recommended on the wiring outside of the rear end cap.

6.6.2Conduit

These housings are designed to allow conduit to be directly connected.

1.Remove the rear fittings and attach the conduit and conduit fittings directly to the housing rear cap. The holes accept 1/2-inch conduit fittings and PG 13.5 conduit fittings. Any unused holes can be covered using the plugs provided in the hardware kit.

6.6.3Feed-through Wiring

These housings have the capability of having the cabling feed through the foot of the housing. This requires the use of feed-through mounts like the MTS-2000, or MTS-2030 J-mount.

1.Prior to mounting the camera. Remove the two dome plugs located inside the housing. See Figure 7.

6.4 mm

0.25 in

1/4-20 x 3/8 Screw

Figure 4: Attaching the Camera

VSE-2300, VSE-2400 specifications

The Sanyo VSE-2400 and VSE-2300 are modern audio-visual systems known for their exceptional performance and versatility, appealing to both casual listeners and audiophiles alike. These systems integrate advanced technology to enhance sound quality, making them a popular choice for home entertainment.

The VSE-2400 boasts an impressive array of features designed to deliver immersive sound experiences. It is equipped with a powerful digital amplifier that ensures high-fidelity audio reproduction. The unit supports a variety of audio formats and can play CDs, MP3s, and streaming services, making it a versatile option for any music lover. Its sleek design is complemented by a user-friendly interface, allowing users to navigate through their media libraries with ease.

One of the main technologies that sets the Sanyo VSE-2400 apart is its implementation of digital signal processing (DSP). This technology optimizes sound output by automatically adjusting audio settings based on the type of content being played. Whether it's a movie, music, or a podcast, the DSP ensures that users receive the best audio quality tailored to their listening preferences.

The VSE-2300, on the other hand, is slightly more compact yet does not compromise on sound quality. This system is ideal for those with limited space but still want a robust audio solution. Like the VSE-2400, it features a high-efficiency digital amplifier, ensuring clean and powerful sound output without distortion.

Both models include Bluetooth connectivity, allowing users to connect their smartphones or tablets wirelessly for seamless music streaming. Additionally, they come equipped with USB ports and auxiliary inputs, offering flexibility in how users choose to play their audio content.

A common characteristic of the VSE series is their built-in equalizers, enabling users to customize audio settings to better suit their preferences. The systems also include remote control functionality, enhancing convenience for users who wish to operate their audio systems from a distance.

In conclusion, the Sanyo VSE-2400 and VSE-2300 are excellent audio-visual systems that offer a rich set of features and technologies, catering to a diverse range of listening needs. Whether for casual enjoyment or serious listening, these systems provide quality sound and easy connectivity, making them worthy additions to any home entertainment setup.