ATTACHING THE FRONT COVER
The speaker and the front cover are packed separately. To attach the cover, line up the six pegs on the speaker with the six corresponding holes on the inside surface of the cover and push gently.
To remove the cover, hold on to both sides and slowly pull straight away from the speaker.
Note
When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools.
| SPECIFICATIONS |
Type | |
| speaker system |
| Magnetic shielding type |
Driver | 20 cm (8”) cone woofer x 2 |
Wave guide horn 13 cm (5”) cone
Wave guide horn 3 cm (1”) dome tweeter
Impedance | 6 Ω |
Frequency Response | 35 Hz to 50 kHz |
Nominal Input Power | 140 W |
Maximum Input Power | 400 W |
Sensitivity | 92 dB/2.83 V/m |
Crossover Frequency | 600 Hz, 4 kHz |
Dimensions (WxHxD) | 364 x 1102 x 397 mm |
| |
Weight | 32.5 kg (71 lbs. 11 oz.) |
Accessories | Spike x 4 |
| Nut x 4 |
●Specifications subject to change without notice due to product improvements.
●Care should be taken not to exceed the input power values noted above.