Yamaha owner manual Bi-wired connections, Woofer terminals NS-8HX R

<Bi-wired connections>

Remove the short bars before connecting.

Woofer terminals

NS-8HX (R) NS-8HX (L)

	SPEAKERS
	R	L
+	–	–	+
Amplifier or
	Receiver

Tweeter/Mid-range terminals

+

–

NS-8HX (R) NS-8HX (L)

	SPEAKERS
R		L
			A
+	–	–	+
			B
Amplifier or
Receiver

Bi-Wired Connections

This speaker system is capable of bi-wired connections. To connect the speaker to the output terminals of the amplifier (or receiver), two pairs of cables for each of woofer and tweeter/mid- range are used instead of standard connections. This type of connection decreases the modulation distortion caused by electric resistance of the cables and driving current of the speakers. Consequently, purer sound quality can be expected.

To utilize bi-wired connections, remove the short bars from the terminals first, and then connect the woofer and tweeter/mid-range to the amplifier separately using two pairs of cables.

Both SPEAKERS A and B should be selected.

When using a banana plug <General model only>

Banana plug

1 Remove the cover by pulling it toward you.

32 Tighten the terminal knob.

3 Simply insert the banana plug into the terminal.

1

2

E-4