Computer System Requirements for Macintosh

∙CD-ROM Drive

∙Recommended screen resolution 1024 X 768 pixels or greater

∙256-color or higher display adaptor

Computer System Requirements for Macintosh

∙Power Macintosh G3 500 MHz or higher

∙Mac OS X version 10.2.6 or later

∙128 MB or more available system RAM (256 MB recommended),150 MB free disk space

∙800 x 600 or higher-resolution monitor displaying millions of colors

Caution:

∙Formatting will delete all the data on the SD Memory Card.

∙Do not remove the SD Memory Card during formatting as this may damage the card and render it unusable.

∙Formatting will delete protected data too.

∙SD Memory Cards formatted on a PC or device other than the camera cannot be used. Be sure to format the card with the camera.

∙When you power off the camera or change batteries, all the data in the built-in memory will be deleted if no SD Memory Card has been inserted in the camera.

∙DO NOT switch modes or rotate the Mode dial if your camera is connected to the printer when using PictBridge.