Ricoh G700 manual Built-in flash reaches up to 10 m, Accessory shoe

Page 3

SMART Smart functions support shooting and post-shooting operations

NEW 12.1 million effective pixels for more precise photo reproduction

Sharply reproduce worksite conditions and even words written on a blackboard. Even after cropping, images remain crisp and vivid.

Built-in flash reaches up to 10 m

For reliable photography even in dark sites such as tunnel interiors, the G700 has a built-in flash with a range of 10 m for wide-angle and 6.2 m for telephoto. With high-sensitivity ISO 3200, the G700 can also shoot in situations where flash cannot be used.

Flash range of

5 m

*Taken with Caplio 400G wide

Manual flash in

10 m

mode

*Taken with G700

ISO 3200

*Taken with G700 with flash off

Accessory shoe

The accessory shoe (conforms to JIS B7101) makes it possible to shoot with commercially available flash units*. This further expands the scenes which can be photographed.

*A flash with both a slave flash function and a pre-flash support function should be used. It is not possible to use units without a spring or lock mechanism or units on which synchronization with the pre-flash cannot be cancelled.

Furthermore, the accessory shoe does not support a synchronizer contact.

■Mode dial for quick mode changes

With the mode dial you can easily switch between CALS mode, auto shooting mode, My Settings mode (for registration of frequently used

shooting settings), and scene mode (firefighting, skew correction, etc.). In CALS mode, you can select from six picture size and quality settings ranging from“5M 43 F”to

“VGA 43 F”.

■Firefighting mode

The focal length is fixed to 2.5 m and ISO sensitivity is raised to enable shooting of clear photographs in the difficult conditions for autofocus at the scene of a fire. Sharpness processing is also done to give the still images a sharper feel.

■Adjust button

By just pressing the ADJ. (adjust) button, you can easily specify exposure compensation, ISO sensitivity, and other settings.

NEW ■Electronic vibration correction function

The G700 utilizes the new electronic vibration correction function that takes two exposures at high speed with the differences being calculated. It is a powerful tool when shooting in low light and when shooting telephoto.

■Skew correction function

Rectangular objects photographed at an angle are corrected so they appear to have been shot squarely. The before-correction image is also recorded.

Before correction

After correction

Image 3
Contents 10 m NEW Extended operation time for up to about 360 pictures Tough The toughness critical for difficult work sitesBuilt-in flash reaches up to 10 m Accessory shoeNEW SD Worm write once read many memory card supported Useful Operation controls offer outstanding ease of use Macro High-performance lens handles various situationG700 Software
Related manuals
Manual 14 pages 12.21 Kb Manual 135 pages 32.88 Kb