Sanyo VCB-3574IR instruction manual Parts Names, Lens mount cap

Page 7

PARTS NAMES

8

 

F

 

9

 

 

G

 

 

1

2

3 2

 

1

 

8Lens mount cap

The cap is installed to protect the lens mount section.

Remove the lens mount cap before installing a lens (sold separately).

9Flange-back adjustment screw (FLANGE BACK ADJ.)

FFlange-back lock screw (FLANGE BACK LOCK)

GCamera installation bracket

The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the longer screws and install the shorter screws on the opposite side to seal the openings.

1Shorter screws: M3 x 4

2Longer screws: M3 x 6

3Camera mounting screw hole: 1/4"-20 UNC

CAUTION:

When installing the camera support, select a location that can support the total weight of the camera and accessories.

English 5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents VCB-3574IR English Features ContentsFor the customers in Canada Information to UserPour la clientèle canadienne Precautions Parts Names Lens mount cap Parts NamesVideo type auto-iris lens If using a Video type auto-iris lensConcerning auto-iris lenses DC type auto-iris lensRemove the lens mount cap from the camera Mounting the LensMount type lens Flange-back adjustment Rewiring the lens cable in the lens iris plugMounting the Lens Coaxial cable type and maximum length ConnectionsElectronic iris function setting SettingsControl name Lens iris adjustment SettingsBacklight compensation setting Picture is not clear TroubleshootingLine phase adjustment No picture on the monitor screenSpecifications
Top Page Image Contents