Sanyo SID-70 manual Operating Your Camera

Connection

Notes

•Be sure to connect power only after all the installation is complete.

•Note that AC / DC adaptor is not supplied with camera.

•Ground should be connected to the GND terminal.

Operating Your Camera

Menu Configuration

MAIN SETUP

Using Coaxial Communications

•Coaxial Communications System

•OSD Control method

CAMERA	DVR	CONTROLLER
SET	MENU/ENTER	OSD KEY
UP	UP KEY	JOYSTICK UP
DOWN	DOWN KEY	JOYSTICK DOWN
LEFT	LEFT KEY	JOYSTICK LEFT
RIGHT	RIGHT KEY	JOYSTICK RIGHT

LENS	●DC
EXPOSURE	●BRIGHTNESS	●SHUTTER	●AGC
	●SENS-UP	●RETURN
WHITE BAL	●ATW	●OUTDOOR	●INDOOR
	●MANUAL	●AWC→SET

DVR

DVD

•	: BNC
• ---- : RS-485

• Video Cable

The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.

Distance	Recommended Cable Specification
300m	3C2V(RG-59/U)
450m	5C2V(RG-6/U)
600m	7C2V(RG-11/U)

Notes

•It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable.

SSDR	●OFF	●ON
BACKLIGHT	●OFF	●BLC	●HLC
SSNR3	●OFF	●ON
DAY/NIGHT	●COLOR	●B/W	●AUTO
	●IMAGE ADJ	●MONITOR	●CAM TITLE
SPECIAL	●SYNC	●MOTION DET	●PRIVACY
	●DIS	●LANGUAGE	●RETURN
EXIT	●SAVE	●NOT SAVE	●RESET

COLOR DOME CAMERA 14 User Guide COLOR DOME CAMERA 15 User Guide