Operating Your Camera
AWC →SET : To find the optimal luminance level for the current environment, point the camera towards a sheet of white paper and press the Function Setup switch. If the environment changes, readjust it.
Notes
•White Balance may not work properly under the following conditions. In this case select the AWC mode.
❶When the color temperature of the environment surrounding the subject is out of the control range (e.g. clear sky or sunset).
2When the ambient illumination of the subject is dim.
3If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically, the White Balance operation may become unstable.
SSDR (Samsung Super Dynamic Range)
SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas.
MAIN | SETUP |
1.LENS | DC |
2.EXPOSURE |
|
3.WHITE BAL | ATW |
4.SSDR | OFF |
5.BACKLIGHT | OFF |
1.When the SETUP menu screen is displayed, select ‘SSDR’ by using the Function Setup switch so that the arrow indicates ‘SSDR’.
2.Use the Function Setup switch to change the SSDR level in the sub menu according to the contrast between bright and dark areas.
SSDR ON | SSDR OFF |
BACKLIGHT
Unlike conventional cameras, the
1.When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch so that the arrow indicates ‘BACKLIGHT’.
MAIN | SETUP |
1.LENS | DC |
2.EXPOSURE |
|
3.WHITE BAL | ATW |
4.SSDR | OFF |
5.BACKLIGHT | OFF |
6.SSNR3 | ON |
2.Select a desired mode using the Function Setup switch depending on the camera purpose. 
BLC : Enables a user to select a desired area on a picture and view that area more clearly.
-LEVEL : Adjust level of the BLC function.
-TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
COLOR DOME CAMERA 20 User Guide | COLOR DOME CAMERA 21 User Guide |