CONNECTING THE CAMERA TO A PC <Using the USB Cable>
Connecting the camera to your PC with the enclosed USB cable, you can charge the battery and download your images to your PC.
Check that “FLATFOTO Photo Album” software was installed correctly before connecting the camera to your PC using the USB cable.
Switch the camera on and then connect it to your PC using the USB cable.
When you connect the camera to a PC, “6” appears on the camera’s LCD to indicate that the camera is communicating with the PC.
✽The PC switches to standby mode until it recognizes
20the camera.
●Connecting the camera to your PC with the
USB cable allows you to do the following:
h Charge the camera battery (/P.21)
h Download and display images (/P.28, 34)
h Modify the camera settings, delete images, format the camera memory and reset the counter (/P.32)
h Take care to connect the plugs on the USB cable into the correct sockets, and ensure that the plugs are inserted firmly. h The Auto Power Off function does not operate when a USB connection is
being used.