Power Your Photo Frame, View Your Photos

2Power Your Photo Frame

1. Connect the supplied AC adapter to the DC – -C-+jack and plug in to a standard household outlet.

2. Slide ON/OFF to ON to turn on.

3. Select a display language. Use or and  to select and confirm the language. The demo photo appears after language selection.

nNote: Always unplug the frame and disconnect from the adapter when the frame is not in use.

1.To load files onto the frame:

•Insert a memory card into the SD/MMC/MS slot

– OR –

•Connect a USB device containing JPEG files into the USB HOST port

–OR –

• Insert both a memory card and USB device

2.The frame automatically enters Slide Show mode after several seconds.

3.Press  to enter Thumbnail mode. Up to 15 photos display at a time. Use the navigation buttons to scroll through.

4.To view as a slideshow, select a photo, then press . The photo is displayed. Use the

navigation hint bar at the bottom of the screen to control the show: