Radio Shack 16-3869 manual Shooting, Is completed

Shooting

Symptom	Cause	Measure
	The battery is running low.	Recharge or use the AC power adapter.
	The power is not on.	Turn the power on.
	The camera is not in shooting mode.	Toggle the MODE button to shooting mode.
	The shutter button is not pressed all the way.	Press the shutter button all the way.
	The internal memory or memory card	Load a new card, or delete unwanted
Even if I press the shutter button,	does not have any free space.	files.
the camera does not shoot.	End of memory card life.	Load a new memory card.
	The flash is recharging.	Wait until the flash recharging process
		is completed.
	The memory card is unrecognized by the	Format the memory card in this camera
		before its first use or when it was used
	camera.	other than this camera.
	The auto power off function is activated.	Turn the power on again.
ImagesdonotappearontheLCDmonitor.	The power is not on.	Turn the power on.
The camera does not focus.	The lens is dirty.	Wipe clean with a soft, dry cloth or lens paper.
	The distance to the subject is smaller	Get your subject within the effective
	than the effective range.	focus range.
The flash does not fire.	The camera is set to / mode.	Switch to another mode other than one
		of those.
The flash cannot recharge.
	The flash is set to no flash.	Set the flash to auto flash.
Even though the flash fired, the	The distance to the subject is greater than	Get closer to your subject and shoot.
image is dark.	flash effective range.
	The image was captured in a dark place	Set the flash to auto flash.
The image is too dark.	while set to no flash.
	It is under-exposed.	Set the exposure compensation to a
		larger value.
The image is too bright.	It is over-exposed.	Set the exposure compensation to a
		smaller value.
The image lacks natural color.	The image was captured in conditions that	Add a white object to the composition.
	are hard for Auto White Balance to adjust to.

70