English
Firmware Upgrades
For the best interaction between your camcorder and your computer, check www.philips.com/support for the latest upgrades available.
1You may need to enter the model number, e.g. key019, to access the upgrade file. Make sure you save the file(s) in a folder on your computer. Unzip them before you install the upgrade.
2Connect your camcorder to your computer. Copy the extracted firmware file into the root directory of your camcorder. After file transfer completes, disconnect camcorder safely from your computer by clicking 
on the task bar to avoid file error. WINDOWS 98SE users: there is no 
icon. Simply disconnect camcorder after file transfer completes.
3Press and hold Shutter and turn the Mode dial to power ON. Your camcorder will start upgrading. During firmware upgrade, both LEDs will blink.
4Turn the Mode dial to power OFF when the LEDs stop blinking. Firmware upgrade is complete and camcorder is ready for use.
17