Philips wearable digital camcorder user manual Preparation, Installation

Preparation

Attaching your neckstrap

Thread the neck strap through the hole as shown in the picture.

Installation

Please insert the by-packed CD into your CDROM drive and follow on screen instructions to complete driver and software installation.

Powering your camcorder

Your camcorder has a built-in USB rechargeable battery. To charge, switch on your computer. Detach the USB cover. Connect your camcorder DIRECTLY to your computer's USB port. Charge your camcorder until the Power level indicator lights up and stops blinking (approximately 3 hours). Keep your computer switched on during charging. Disconnect safely after charging completes.

(See page 15 for more information)

IMPORTANT!

WINDOWS 98SE users:

DO NOT CONNECT your camcorder to the computer BEFORE driver installation.

➯TIP

•You can also use the supplied battery module to provide instant power

to your camcorder. When your camcorder is charged and the battery module is in use, your camcorder will first use up the power from the external battery.

•You can organize and transfer your files while your camcorder is charging. (See page 15 for more information)

4