Before Use
Power Supply
ªUsing the AC Adaptor
1 |
1Connect the DC Input Lead to the Movie Camera.
2Connect the DC Input Lead to the AC Adaptor.
3Connect the AC Mains Lead to the AC Adaptor and the AC mains socket.
≥The AC Mains Lead’s outlet plug does not fit entirely into the AC Adaptor socket. A gap will
remain as shown 1.
≥Before connecting or disconnecting the power supply, set the [OFF/ON] Switch on the Movie Camera to [OFF] and make sure that Power Lamp is not lit.
ªUsing the Battery
Before use, fully charge the Battery.
≥We recommend using Panasonic’s Battery. ≥We cannot guarantee the quality of this Movie
Camera when batteries of other companies are used.
1Attach the Battery to the AC Adaptor and charge it.
≥Since the Battery will not be charged when the DC Input Lead is connected to the AC Adaptor, disconnect it from the AC Adaptor.
≥The [CHARGE] Lamp lights up, and charging starts.
≥When the [CHARGE] Lamp goes off, charging is completed.
≥When charging the overdischarged battery, the [CHARGE] Lamp blinks at first, but the battery is charged normally. When the temperature of the battery is too high or low,
the [CHARGE] Lamp blinks and the charging time becomes longer than usual.
2Attach the charged Battery to the Movie Camera.
Disconnecting the Power Source
Set the [OFF/ON] Switch (43) to [OFF] and, while pressing the [PUSH BATT] Button (50), slide the Battery or DC Input Lead upward to disconnect it.
(50) PUSH
BATT
ON
(43)
≥For other notes concerning this item, see