Before Use
1Open the Lock Cover (31) by holding the tabs on both sides 1, press the Lock Button (30) and detach the Grip Belt.
(31) | (30) |
| 1 |
2Detach the end of the Grip Belt.
3Slide A to the direction of the arrow and reattach the Grip Belt.
A
4Attach the Grip Belt around your wrist.
≥When returning the Grip Belt to the Grip Belt Attachment, press the Lock Cover 2 to ensure that it is securely locked.
2
Attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1Pass the end of the Lens Cap Cord through the hole in the Grip Belt Attachment part and the Lens Cap through the Lens Cap Cord.
≥The removed Lens Cap can be hooked onto the Grip Belt. (It is not possible when using as a hand strap.)
≥When you are not recording, be sure to cover the Lens with the Lens Cap for protection.
Attaching the Shoulder Strap
We recommend that you attach the Shoulder Strap before going out of doors to record so as to avoid dropping the Movie Camera.
1Pull the end of the Shoulder Strap through the Shoulder Strap Holder (52) on the Movie
Camera.
2Fold the end of the Shoulder Strap, run it through the Shoulder Strap Length Adjuster, and pull it.
≥Pull it out more than 2 cm 1 from the Shoulder Strap Length Adjuster so that it cannot slip off.