Philips CAM300 user manual Load the Micro SD card, Turn on, First-time setup, Select a scene

Tip

3 Get started

Load the Micro SD card

1 Flap open the protective cover on the Micro SD card socket.

2 Insert a Micro SD card (not supplied) into the socket.

• Make sure that the the Micro SD card is not write-protected.

• Make sure that the metal contact of the card faces down.

3 Close the protective cover securely.

Turn on

•Flip open the swivel touch screen.

»»For first-time users, a menu for OSD language selection is displayed (See ''Get started - First-time setup).

Tip

•• To save energy, the camcorder turns off automatically after being idle for 3 minutes.To turn on the camcorder again, press .

To turn off the camcorder:

•Press and hold .

• Or close the swivel touch screen.

»»The backlight on the swivel touch screen turns off.

First-time setup

When you turn on the camcorder for the first

time, a menu for OSD language selection is
displayed.
1	On the swivel touch screen, tap / to
2	select a language.

Tap [OK] to confirm.

»»A welcome message is displayed briefly.

	»»An inquiry box for date and time
3		setting is displayed.
	Tap [Yes] to confirm.
4	»»A date setting menu is displayed.
	Tap	/	to set the day, month and year
5	successively.
	Tap [OK] to confirm the date setting.
6	»»A time setting menu is displayed.
	Tap	/	to set the hour and minute
7	successively.
	Tap [OK] to confirm the time setting.

»»The first-time setup is complete.

»»The camcorder enters viewfinder mode.

•• See 'Use your camcorder - Adjust settings' for more settings.

Select a scene

1 In viewfinder mode, tap to show the system setting menu.

2 Tap [Scene] to enter scene setting.

3 Tap / to select a scene you like.

4 Tap [OK] to confirm the setting.

EN 7