Ricoh G700 manual Using the Self-timer, Start the timer

If you are using the camera for the first time, read this section.

Note-------------------------------------------------------------------------------------

•The flash mode setting is retained until you press the F button again.

•The auxiliary flash fires to increase the AE accuracy.

•The flash can not be used in some shooting modes or with some shooting menu options (GP.113).

Using the Self-timer

The camera offers a ten-second timer for self-portraits and a two- second timer to prevent blur caused by camera movement when the shutter-release button is pressed.

1 With the camera ready to shoot, press the t (Self-timer) button.

• The Self-timer symbol appears on the screen.

• The [10] to the right of the symbol indicates the number of seconds. In this case, if you press the shutter release button, the camera will shoot after 10 seconds.

•Each press of the t button changes the self-timer setting in the following order: 10 sec, 2 sec, and Self-timer Off.

2 Start the timer.

•Press the shutter-release button to lock focus and start the timer. If the ten-second timer is selected, the AF auxiliary light will light.

Note-------------------------------------------------------------------------------------

•The camera remains in self-timer mode even after the image is shot. To cancel the self-timer, press the t button and change the self-timer setting to [Self- Timer Off].

•When the self-timer is set to 2 seconds, the AF auxiliary light does not blink.

•When the self-timer is set, the [Interval Shooting] setting is disabled.

32