Ricoh G700 manual Using Skew Correction Mode, Orange frame. Up to five areas can be recognized

2 TakingPictures

in Scene Mode

Using Skew Correction Mode

1	Select [Skew Correct Mode] in the scene mode menu and
	press the MENU/OK button.
2	Press the shutter release button to shoot the picture.
	•	The display indicates that the image is being processed, and then
		the area recognized as the correction range is displayed with an
		orange frame. Up to five areas can be recognized.
	• If the target area cannot be detected, an error message appears. The
		original image remains unchanged.
	•	To select another correction area, move the orange frame to the
		target area by pressing the $ button.
	•	To cancel skew correction, press the ! button. Even if you cancel
		skew correction, the original image remains unchanged.

3 Press the MENU/OK button.

•The display indicates that the image is being corrected, and then the corrected image is recorded. The original image remains unchanged.

Note-------------------------------------------------------------------------------------

You can also correct the skew of a previously shot still image (GP.71).

Caution---------------------------------------------------------------------------------

When [Skew Correct Mode] is selected, note the following:

•To shoot the subject as large as possible, position it so that the entire portion of the subject is visible on the picture display.

•The camera may fail to recognize the subject in the following cases:

-When the image is out of focus

-When four edges of the subject are not clearly visible

-When it is hard to distinguish between the subject and background

-When the background is complicated

•Two images, one before correction and the other after correction, are recorded. If the number of remaining shots is less than two, you cannot shoot the subject.

•The correction area may not be detected properly if the [Date Imprint] function is activated.

50