Recording quality / condition Other functions

Recording quality / condition

Other functions

Setting Recording

Quality

You can select between two recording qualities. Default is SP.

Definition

•SP (Standard Play) -

Model RP5020 allows about 760 mins recording while model RP5025 allows about 1520 mins recording.

•HQ (High Quality) -

Model RP5020 allows about 530 mins recording while model RP5025 allows about 1060 mins recording.

1. Press MENU button
three times, (SP or HQ
show on display.)
2. Toggle between SP	SP
and HQ by pressing
REVERSE or
REVERSE or
FORWARD.
3. Confirm selection by
pressing MENU or	HQ
STOP button.

Setting Recording

Condition

You can select between two recording conditions. Default is DICT.

Definition

•CONF (Conference) - in a more open area and recording source is far from the unit.

•DICT (Dictation) - in a more enclosed area and recording source is close to the unit.

1. Press MENU two times until DICT or CONF show on display.

	2. Select recording	DICT
	2. Select recording
	condition by pressing
	REVERSE or FORWARD.
	3. Confirm selection by
	pressing MENU button.
	(You may press STOP to	CONF
	exit from further	CONF
	exit from further
	selection.)
	Tip:
	For conferences, to obtain
	optimum recording quality, place

the recorder with the microphone freely exposed to the sound source as close as convenient. A built-in automatic recording level control will set the optimum record level during manual recording. Avoid recording near unwanted noise sources, such as air conditioners or fans.

IntroScan

This feature allows playback of the beginning 3 seconds of each file in a folder.

1.	Select folder (A/B/C/	A
1.	Select folder (A/B/C/
D)and file.		MM	DD
			AM

2.	Press REVERSE or	ONE	DICT
FORWARD until ALL		SP
shows on display
3.	Press PLAY to start	A
introductory playback,		A
		MM	DD

INTRO shows on
display.		ONE
display.		SP
4.	Press PLAY to start	SP
4.	Press PLAY to start
playing desired file.
5.	Press STOP to exit Intro Scan sooner.

Play one / play all

You can choose to play a specific file or all files in a folder.

1.In STOP mode, press MENU button repeatedly until ONE appears on display.

2.Press REVERSE or FORWARD to toggle between ONE and ALL.