Buttons on the Remote Control, Tip

Chapter 2: The Remote Control

AUX

ON • OFF

VIDEO WEB EMAIL VOD

MUTE	HOME
	CH +
VOL	VOL
	CH -
GUIDE	MENU

KEYBD TOOLS INFO

Indicator OK

	SELECT
BACK		EXIT•CLEAR
1	2	3
4	5	6
7	8	9
AUDIO•INPUT		ANTENNA
	0
REV•REPLAY	PLAY	FWD•SKIP
RECORD	STOP	PAUSE

Note: The TV and AUX buttons also turn on most RCA, GE, and Proscan, products.

Tip

To turn off most RCA, GE, and Proscan components that are connected to the decoder, press ON•OFF twice within two seconds.

This feature only works with some RCA, GE, and Proscan products.

The Buttons on the Remote Control

(0-9) Number buttons Select channels by pressing the number buttons.

Red, green, yellow, and blue buttons (at the bottom of the remote) Specific functions defined by your service provider.

ANTENNA In decoder mode, turns off the decoder signal to allow other signals to pass through. In VCR mode, functions as the TV/VCR button.

Arrows Move the on-screen highlight, and enter data such as letters or numbers in certain menus.

AUDIO•INPUT In decoder mode, changes the programÕs audio language, if available. In VCR or TV mode, selects between the Video Input Channel and the tuner for compatible components. Video Input Channel refers to the signal coming from the component connected to the audio/ video input jacks on the VCR or TV.

AUX Puts the remote in AUX mode. Can also be programmed to operate some compatible products (A/V receiver, DVD, VCR, etc).

BACK In Web mode, goes to the previous web page. In menus, goes back to the previous screen or menu. In TV mode, may return to the previously viewed channel.

CH + and CH – Selects next higher or lower channel in the channel list.

EMAIL Turns on the decoder and goes to your email account, if your service provider offers one.

EXIT•CLEAR Exits or clears menus.

FWD•SKIP Fast forwards video in stop mode. This button also searches forward if pressed during playback.

GUIDE Displays the decoder program guide, if your service provider offers one.

HOME In Web mode, takes you to your home page.

Indicator Indicates the programming mode when programming the remote to control components.

INFO Shows on-screen information of the decoder, VCR, TV, DVD player, etc. (whichever component is set as the remote controlÕs active device).

KEYBD Brings up the on-screen keyboard or removes it. Also acts as an enter button when using the on-screen keyboard.

MENU Displays the on-screen menu system.

MUTE Reduces the TVÕs volume to a minimum level on compatible TVs or A/V receivers.

Chapter 2

Illustrations contained in this document are for representation only.