Date and Time Display
Recording Date and Time, Date, or Date and Title on Your Tape
The time and date, date only, or date and title can be recorded on your tape. Whenever one of the displays appears in the viewfinder, it will be recorded. The camcorder also has auto date and auto title features.
Repeatedly Press
DATE/ TIME
No Display
10:30AM
11/18/1996
Date and Time
11/18/1996
Date Only
AUTO
11/18/1996
Auto Date
TITLE
11/18/1996
Auto Title
To Select Display to Record
1.Repeatedly press DATE/TIME to select the display you want to record.
•Select date and time to continuously record the date and time.
•Select 
AUTO to automatically record the date for 10 seconds at the beginning of the recording.
•Select 
TITLE to automatically record the title and date for 10 seconds at the beginning of the recording.
•Select date only to continuously record the date.
•Select no display if you do not want any of the displays recorded.
Charging the Camcorder’s Built-in Clock Battery 
The camcorder has a
This battery must be charged approximately every two months.
1.Attach a power supply (adapter/ charger or charged battery) to the camcorder.
2.Make sure CAMERA/OFF/VCR is
in OFF.
3.Leave the power supply attached at least 24 hours.
Cautions: If this battery is not charged every two months, it will
Do not attempt to replace this battery. Take the camcorder to an authorized Servicenter.
27