ProEdit Features
To Create a Title
1.Attach a power source to the camcorder, press and hold the small button on CAMERA/OFF/VCR while sliding it to CAMERA.
2.Press TITLER to display titler graphics in the viewfinder. A flashing cursor will appear.
3.Press EDIT•ADV to move the flashing cursor to the place you want to begin your title.
4.Select the first character for your title by pressing the Title Select + button or the – button until the character you want appears in the viewfinder.
See the “Chart of Characters in Titler’s Register” below for the characters available.
5.After you have selected the first character, press EDIT•ADV to move the flashing cursor where you want your next character to appear.
6.Repeat steps 4 and 5 until you have completed the title.
7.When you are finished, press TITLER to store the title and remove the title display from the viewfinder.
Important Note: Remember to remove the titler graphics from the viewfinder for normal recording.
To Correct an Error
1.Press TITLER to display the titler graphics in the viewfinder.
2.Press EDIT•ADV until the flashing cursor is placed over the character you wish to correct.
3.Press the Title Select + button or the
– button until the correct character appears.
Note: If you want to delete a character, press + or – until the blank space appears.
Chart of Characters in Titler’s Register
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ? ’
. / , – ; : < > ! (BLANK)
33