Powering the Camcorder
Using the Optional Thomson Car Cord Adapter
To power your camcorder from the cigarette lighter socket of a car, truck, or RV, you need the optional car cord adapter DCC096 shown on page 45.
The DCC096 car cord is especially designed to convert power from a
Caution: The DCC096 car cord is designed to be used only with vehicles having
Warning: To avoid possible damage to your camcorder, use only the DCC096. It has positive tip polarity and is capable of converting
Cigarette Lighter Socket
BATTERY
DCIN
9.5V
DC IN 9.6V Jack
Optional Car Cord
Adapter (DCC096)
1.Remove the adapter/charger’s DC cable or battery from the camcorder, if either is attached.
2.Connect the small plug on the car cord to the DC IN 9.6V jack located on the back of the camcorder.
3.Insert the other end of the car cord into the vehicle’s cigarette lighter socket.
4.Place the camcorder’s POWER switch in CAMERA. If the car cord is connected properly, the POWER indicator will light.
Notes: The vehicle does not have to be turned on for the camcorder to operate from the DC car cord.
When using the car cord to power the camcorder, the battery level indicator may
display . This indicator is used for battery operation and has no meaning when using the car cord to power the camcorder.
15