Date and Time Display
Set the Time and Date
REW (Rewind)
DATE/TIME
F.FWD (Fast Forward)
POWER
STOP/EJECT
REVIEW DISPLAY RESET DATE TITLER | CAMERA OFF | VCR | REW | PLAY | F.FWD | STOP/EJECT | ||
/TIME |
| POWER |
| – | TITLE SEL | + | EDIT – ADV | |
|
|
|
|
|
|
|
|
|
1.Attach a power supply (battery or adapter/charger) to the camcorder.
2.Press and hold the small button on POWER and place in CAMERA.
3.Press DATE / T IME to display the date and time in the viewfinder. A flashing cursor lets you know which part of the display you are setting.
Note: If flashing cursor does not appear, press and hold DATE/TIME and then press
STOP/EJECT.
12:00AM 1/ 1/95
4.Repeatedly press F.FWD or REW until correct month appears. Press and hold the button to advance the digits faster.
5.When the correct digit is displayed, press STOP/EJECT. The cursor will move to the next part of the display.
6.Repeat steps 4 and 5 to set the correct month, day, year, hour, minute(s), and AM/PM.
7.After setting AM or PM, press DATE/TIME to remove the flashing cursor and start the internal clock.
To Correct the Date or Time
To correct the date or time, press and hold DATE/TIME and then press STOP/EJECT. The display will appear in the viewfinder along with the flashing cursor. Use F.FWD and REW to correct the time or date. Press DATE/TIME to remove the flashing cursor and start the clock.
26