-Synchro Edit
Cl+llonxl ,_
Avsolo
Cable
(not lupplled) "_
Synchro edit allows your camcorder to control a compatible VCR (one that has a camera pause jack) while
tapes are being copied from the camcorder to the VCR.
The PAUSE button on the camcorder causes the VCR to start
and stop recording. This is especially convenient when you want to record only selected segments from a previously recorded tape.
To Synchro Edit
AV OUT
Jack
Back ol VCR
Note: If your VCR has a single (mono) audio input, connect
either the left or fight audio plug to the audio input on the VCR.
I. Connect your camcorder to a compatible VCR as shown above. An optional AVS010 Synchro Edit Cable is required. Optional accessories are shown on pages 44 and 45.
2.Prepare the camcorder to play back the tape you want to
copy.
•Slide POWER to turn on the camcorder.
•Slide CAMERA/PLAyBACK switch to PLAYBACK
position.
•Press EJECT and insert the tape.
•Press PLAy, then PAUSE to put the camcorder in the Play/Pause mode. (The AVS0t0 cable must be connected to VCR before camcorder will pause.)
3.Prepare the VCR to record.
•Press POWER to turn on VCR.
•Press EJECT and insert blank tape in VCK.
•Press RECORD to put the VCR in the Record/Pause
mode.
Note: If the VCR begins to record instead of pausing, you will need to change the position of the switch on the AVS010 cable. Stop the VCR, change the switch, and then press RECORD on the VCR again.
4.Pressing the PAUSE button on the camcorder will now start
the camcorder playing and also start the VCR recording.
5.Pressing PEw, F.FWD, STOP, or PAUSE on the camcorder
automatically puts the VCR
into Record/Pause mode. This allows you to search (forward or backward),
•To search forward (or backward), press and hold F..FWD(or PEW). When you release the button, the camcorder will resume normal playback. To begin dubbing again, press PAUSE twice. (The first press pauses the camcorder, the second press begins dubbing.)
•To
33