RCA CC-285 owner manual Self-Timer Recording, Light on Front, Self Timer button

Page 31

- Self-Timer Recording

• First prepare the camcorder to record. Instructions are on

pages 18 and 19.

• While the camcorder is in the

Record/Pause mode, press the SELF TIMER button once. The

Notes:

• The Tally

Light on the

front

of

the camcorder

will flash to let

you know

the

self-timer

is

 

activated

and

the camcorder

is

about to

start

recording.

 

 

SELF _MER

Button

The SELF TIMER button lets you time-delay the start of a recording so you can join the picture without being seen walking into it.

(1 23 ) SELFT,.E.

camcorder will automatically start recording after approximately ten seconds and will continue to record

approximately 30 seconds.

•If you want the camcorder to record longer than 30 seconds, press the SELF TIMER button

twice (instead of once) while the camcorder is in the Record/

Pause mode. After ten seconds the camcorder will start

recording and continue to record until the Record Start/Stop button (thumb trigger) or PAUSE button is pressed.

• When the Tally light stops

 

flashing

and

 

lights continuously,

 

the camcorder

is recording.

•

Pressing

the

SELF TIMER button

 

three times during the Record/

 

Pause mode cancels the self-

 

timer

recording.

•

If the

Record

Start/Stop button

 

(thumb trigger) is pressed while

 

a self-timer recording is in

 

progress, the recording will stop

 

and the camcorder will enter the

 

Record/Pause

 

mode.

•

The SELF TIMER button has no

 

effect

during

 

normal recording.

-Adjustable Time-Lapse

Recording

DISPLAY

Button

This feature lets you compress slow-moving action (like nature or photography studies) into clean, quickly viewed videos. It allows intermittent recording so you can use a cassette efficiently.

1.Prepare the camcorder to record as described on

pages 18 and 19.

2.Press the DISPLAy button to

bring the tape-counter (or time-remaining) display to the viewfinder, lhis will let you see the INTERVAL display when it appears.

3.Press the TIME LAPSE button

for approximately two seconds. The first INTERVAL

display will appear in the viewfinder.

INTERVAL 0:30

4.Press the TIME LAPSE button

repeatedly until the length of time you desire between

recordings appears in the viewfinder. Refer to the chart below.

0:30 30-SecondInterval

1:00l-MinuteInterval

2:002-Minute Interval

5:00 5-Minute Interval

MAN Manual Interval*

*Manual Interval means that

the camcorder will record for one second every time the

Record Start/Stop button

(thumb trigger) is pressed. This is used for animation

recording as described on the next page.

Pressing TIME LAPSE again when the MAN display is showing will remove the INTERVAL display from the screen.

5. When the desired interval time

is displayed in the viewfinder,

press the PAUSE button or the

Record Start/Stop

button

(thumb

trigger)

to start

interval

recording.

The

camcorder

will

record

for

approximately

one second

every interval. The time until

the next recording will be

displayed

 

in the

viewfinder.

6. To stop

interval

recording,

repeatedly

press

the

TIME

LAPSE button until the word

INTERVAL disappears

from the

viewfinder.

 

 

 

 

Notes:

•The Tally Light on the front of the camcorder will light to let you know when the camcorder is recording.

•The interval time can be changed any time (even during recording) by pressing the TIME LAPSE button.

•The time and/or date can be recorded by displaying it in the viewfinder during time-lapse recording.

•Rainbow noise (a vertical colored bar) may occasionally appear in the picture during playback.

29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Operating Instructions Warranty Information Your Tapes AdjustablePowering Record Vital Information HereCamcorder Features Convenience Features Audio FeaturesWhat Your Camcorder Can Do For You Locate the Clock Battery Installing BatteryStart recording Put the CAMERA/PLAYBACK switch in the CameraInsert a cassette tape Prepare camcorder to recordMicrophone Accessory Shoe@ a Utofocus Switch MAN/ Auto Camcorder Operating Controls and Their FunctionsEject Lever Viewfinder Displays What @ Electronic ViewfinderFrom @ DATE/ Time Button 11@DISPL.4 Y ButtonTime Lapse Button Time Lapse External Microphone 222MIC Switch WIND/NORMAV OUT Connector Audio Video Output DC Power Jack DCClock BA Ttery PLA Y Button PA USE ButtonVideo DUB Button 44@A V in Jack CAMERA/PLA YBA CK SwitchOptional DC Car Cord Rechargeable BatteryUsing the Adapter/Charger to Power Your Camcorder AC Adapter/ChargerUsing Battery to Power Your Camcorder Charging The Battery Attaching Charged BatteryTo Camcorder Using the Optional DC Car Cord to Power Your Camcorder Checking Battery PowerAttaching Car Cord Cassette Care and Storage Recording TimeInserting/Removing Cassettes Erase ProtectionCAMERA/PLA Yback How To Record With Your CamcorderThumb trigger or Attach power source toOnce youve started recording To rewind and review recordingElectronic Viewfinder EVF Eyepiece Focus Control Using Your Camcorders Recording FeaturesAdjusting for Right or Left Eye Tilt AdjustmentCamcorder Status Display Battery Level IndicatorGently push the cover closed until it snaps into place Installing Battery for Time/Date DisplaySetting Time/Date Display in Viewfinder Install the battery as described aboveUsing Zoom Ring Manually Zooming Using Power Zoom ButtonsQuick Review Manual Focus Focusing Your Camcorder Auto FocusMacro Focus Fading Out Adjusting a UTO Iris For Unusual LightingFading In and Out of Scenes FadingThree Times Displa Y Button ChartBattery Level Displa Y ButtonForward Using Tape CounterUsing Tape Counter Memory UsingTime-Remaining DisplayOooo Using Variable Shutter SpeedsLight on Front Self-Timer RecordingSelf Timer button RecordingRepeatedly press the Time Lapse button until the word Animation RecordingYou can reduce the wind noise MIC SwitchSliding the NORMAL/WIND MIC Audio Dubbing Video Dubbing Editing FeaturesFlying Erase Head Flying Erase Head Edit SearchSynchro Edit Slide CAMERA/PLAyBACK switch to PlaybackTo Synchro Edit ToAudio Dub Slide the CAMERA/PLAYBACK switch to the Playback positionAudio Dubbing Position Slide the CAMERA/pLAYBaCK switch to the PlaybackVideo Dubbing To Video DubVCR JackStart the tape playing Slide the CAMERA/PLAYBACK switch to the Camera positionStart reoording If your VCR or TV monitor hasOne TransformerTerminal Back Your Leave the RF adapter hooked To a How to Connect Your Camcorder Video Monitor for PlaybackCamcorder is Traveling Tips Camcorder Recording TipsShutter Speed Tips ProperCare of Your Camcorder Transformer-type power converterTape Tips Storing Your CamcorderAVS010 Synchro Edit Cable WM002 Wireless MicrophoneAC028 Soft Camcorder Case KK050 Rugged Hard CasePlease complete other side also Accessory Order Form for RCA Camcorder Model CC285Page Page FWD King RemoteHow does state law relate to this warranty What does your warrantynot coverWhat will we do

CC-285 specifications

The RCA CC-285 is a noteworthy cassette player that was designed to combine high-quality audio performance with user-friendly features. Launched during a period when cassette tapes were a dominant medium for music playback, the RCACC-285 quickly garnered attention for its blend of functionality, durability, and style.

One of the standout features of the RCA CC-285 is its impressive sound quality. Equipped with advanced audio processing technologies, this cassette player is capable of delivering clear and dynamic sound that enhances the listening experience. The system uses high-fidelity audio components to ensure that both the high and low frequencies are well represented, making it suitable for a wide range of music genres.

The design of the RCA CC-285 is also notable, featuring a classic look that appeals to both vintage collectors and modern users alike. The front panel is user-friendly, with clearly labeled buttons and dials that make operation straightforward. The aesthetically pleasing design is complemented by a robust build quality that ensures longevity, making the CC-285 a reliable choice for everyday use.

In terms of connectivity, the RCA CC-285 offers versatility. Users can easily connect the player to external speakers or amplifiers, expanding their audio setup. Additionally, the device often comes with an auxiliary input, allowing it to integrate with modern devices such as smartphones and tablets. This connectivity feature enables users to enjoy their favorite tracks from various sources without compromising audio quality.

The RCA CC-285 often boasts automatic features, including auto-reverse playback, which allows uninterrupted listening sessions. This technology automatically rewinds the tape when it reaches the end, providing a seamless experience when enjoying longer content or mixtapes. Furthermore, some models may include programmable features, allowing users to create custom playlists for their listening enjoyment.

Overall, the RCA CC-285 stands out as a cassette player that embraces both classic and contemporary technologies. With its impressive sound quality, user-friendly design, robust connectivity options, and automatic playback features, the RCA CC-285 appeals to a diverse array of users. Whether for nostalgic audiophiles or casual listeners seeking a reliable cassette deck, the CC-285 remains a distinguished choice in the world of audio devices.
Top Page Image Contents