ELANsat Tech CF232-5 manual Pinout

5. HARDWARE SPECIFICATION

5.1 PINOUT

The CF232 is supplied with a 300mm long Type45 cable that terminates with a DB9 Male connector with female screwlocks (to match the port at the back of a PC)

The pin-out below applies to both the CF232 card and the DB9 male connector on the supplied cable (the cable is pinned one-to-one).

PIN	NAME	FUNCTION
1*	DCD	Data Carrier Detect input
2	RX	Receive Data input
3	TX	Transmit Data output
4	DTR	Data Terminal Ready output
5	GND	GROUND
6	DSR	Data Set Ready input
7	RTS	Request To Send output
8	CTS	Clear To Send input
9	RI or Host Vcc*	Ring Indicate input (CF232) or Host Vcc (CF232-5)

*Total Host Vcc current available is limited by the host’s capabilities. Exceeding its maximum could damage the CF232 and/or the host. The Host Vcc output may be at 5V or 3.3V.

For ref: mating connector type: Honda rmc-e9f2s-bsla2n-a2 *Pin 1 is nearest the edge of the card.

PIN 9 PIN 1

H/W Rev1.00 to 2.00 (incl.)

x8	PIN 9	PIN 1
	x1

H/W Rev3.00 (with baud multiplier switch)

Elan Digital Systems Ltd. 7 CF232 USER’S GUIDE