O P E R AT I O N | ENGLISH |
ENGLISH | O P E R AT I O N |
To scan memory locations (continued):
b)Push the CHANNEL SELECT button up or down to resume scanning memory locations.
CHANNEL SELECT 
button 
c)Press the MODE button to proceed to other functions.
If you do not press any button within
10 seconds, the radio will automatically resume scanning memory locations. (NOTE: If you want to reduce the number of memory locations being scanned you need to ”unprogram“ all unwanted locations by changing both the main channel and privacy code to 00. See Programming Memory Locations, page 8.)
1.Press the MODE button until the Ring Setting icon flashes and the current
setting (Vibrate + Ring, Vibrate Only, or Ring Only) is displayed.
Vibrate Only | Ring Only |
2.Push the CHANNEL SELECT button up or down to change the ring setting.
3.Press and release the ENTER button to enter the new setting, or press the MODE button to enter the new setting and proceed to other functions.
Turning Roger Beep Off and On
2.Push the CHANNEL SELECT button up or down to turn Roger Beep on or off.
3.To enter the new setting you can press and release the ENTER button, or press the MODE button to enter the new setting and proceed to other functions.
ENTER
button 
Turning Keystroke Tones Off and On
With Keystroke Tones turned on, your unit will sound beeps each time you press a button or change a setting. To change Keystroke Tones:
1. Press and hold the ENTER button for |
5 seconds to turn keystroke tones off. A |
double beep will sound and the Beep icon |
Changing Call Tone Settings
You can choose between ten different call tone settings to transmit a unique call alert. To select a call tone setting:
1.With the power
turned off, press
and hold the CALL button as you turn the power on. The number of the
current call tone setting will display and the tone will sound for one second, after releasing the call button.
2.Push the CHANNEL SELECT button up or down to hear the other call tone settings.
3.With the number of your desired call tone setting displayed, press and release the TALK button or ENTER button. Your selection will be entered.
Using Call Tones
and VibrAlert™
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently, or both. To change ring settings:
With Roger Beep turned on, your listener will hear an audible tone when you release the TALK button. To change Roger Beep mode:
1.Press the MODE button until the Roger Beep icon flashes and the current setting (“on” or “off”) is displayed.
MODE |
button |
will disappear. |
2. To turn keystroke tones back on, press and |
hold the ENTER button for 5 seconds again. |
A single beep will sound and the Beep icon |
will appear. (NOTE: The unit must not |
be in Lock mode during these steps.) |
| ENTER |
TALK button | button |
|
4.If no buttons are pushed for 15 seconds, the unit will automatically enter the last call tone pattern that was displayed.
11 | 12 |