Specifications, Body specifications | Cambo X2-PRO specification

5. SPECIFICATIONS

Body specifications:

Weight (body only): 1.9 kg

incl. Bellows and mount-block: 2,1kg

-Size (hxbxd): 26,3 x 29,3 x 19,5 cm.

-Front Panel geared movements:

Horizontal Shift:	17,5mm left, 17,5mm right
Vertical Shift:	17,5mm up, 17,5mm down
Tilt angle:	20° up, 20° down
Swing angle:	20° left, 20° right

-Focussing range: 63 to 150mm (global focal length without recessed lensplate)

Note that the possible amount of Lens panel movement is depending on:

-the image circle of the used lens

-the chip size

-the body / bayonet construction of the dslr camera

Lenses:

The X2-PRO camera is suitable for use with Schneider ApoDigitars 28, 72, 80, 90, 100, 120 and 150; for the Rodenstock ApoSironar Digital 90, 105, 135 and 150.

The body is also useable in combination with the following lens adapters:

-Hasselblad CF lens adapter for use of Hasselblad CF lenses

-Mamiya 645Pro lens adapter for use of Mamiya 645 Pro lenses

-Mamiya RB/RZ lens adapter for use of Mamiya RB or RZ lenses.

For other lens solutions contact your Cambo dealer.

DSLR camera compatibility:

The X2-PRO system is introduced with mount-blocks for the following camera bodies: Canon 1D series and 5D, Nikon D2x and D200, Fuji S3 and Mamiya ZD.

Other mounts will follow, as new DSLR bodies will be introduced.

Spirit levels, Camera demo base.

The spirit levels are of a high quality and used in two directions to level the focusing block. The Lens panel housing has a level for exact horizontal positioning of the lens.

For Cabinet presentation a demo support for the X2-PRO is available.

Accessories:

For more possibilities and accessories please contact your Cambo Dealer.

Cambo R&D		September 2006

This Specification-sheet is prepared by Cambo with care, although no responsibility, financial or otherwise, is accepted for any consequences arising out of the use of this manual or this material. All specifications in this manual are subject to change without notice.

Fotografische Industrie B.V.

P.O. Box 200	8260 AE	Telefax:	+31(0)38-3315110
Haatlanderdijk 45	8263 AP	Email:	info @cambo.com
Kampen, The Netherlands		Cambo site:	www.cambo.com
Telephone:	+31(0)38-3314644