Table of Contents
Description | Page |
Introduction & Safety Notes | 3 |
Control Panel Guide | 4 |
Connecting and Using Your Travelite | 5 |
Flash Power Control | 6 |
Modeling Lamp Controls | 6 |
Synchronization | 6 |
Changing the Modeling Lamp | 7 |
Changing the Fuse | 7 |
Introduction
Dear Valued Customer,
Thank you for choosing the Calumet Travelite professional flash system. Accurate, ergonomic, powerful and simple to use, the Travelite was designed by working closely with photographers to develop a flash that meets the high standards demanded in professional studios today.
All
In order to obtain the full benefit from your purchase, please take a few moments to familiarize yourself with this user manual.
Thank you,
Calumet Photographic
Changing the Flash Tube |
| 7 |
Mounting and Removing Reflectors |
| 7 |
Travelite Accessories | 8 | – 9 |
Specifications | 10 | – 11 |
2calumetphoto.com
ALWAYS
•Always switch power off and disconnect from the supply before changing modelling bulb or flash tube.
•Always disconnect the supply before changing the fuse. Never replace with a fuse of a different rating.
A spare fuse is fitted in the fuse holder under the AC inlet (see page 4).
•Always excercise care when handling equipment that has been in use. The reflector and front end of the unit can become Very Hot.
•Always avoid placing cables where they can be tripped over. Protect from heavy, sharp or hot objects, which may cause damage and replace damaged cables immediately.
•Due to the high voltage / high energy used in Travelites, all servicing must be carried out by a
•Always remove the power cord by gripping the plug. NEVER pull the cord.
•Always ensure that any extension cord used has a suitable current rating to prevent overheating and never use coiled extension cords.
•Always remove the flash head covers before using.
Safety Notes
DO NOT’S
•Do not use in an environment where moisture or flammable vapor is likely to come in contact with the unit.
•Do not plug your Travelite into an AC supply and a
•Do not restrict air vents while in use.
•Do not use a unit with damaged housing, moldings, flash tube or modeling lamp. If the unit is dropped or damaged in any way, always have it checked out before using.
•Do not operate the unit without a safe grounded AC supply.
calumetphoto.com 3