504/604 MANUAL V2.1 | Optional Functionalities > p. 48 |
Hide text overlay
-will hide all overlaid graphics (status bar, menu items, etc.) to only show the video image.
Open scheduler
- will take you directly to the scheduler screen.
Start recording
-will start recording right away. You can also press OK in the
Settings
-will open the videocorder settings screen (see next section).
-Once you have finished adjusting your settings, press 
to go back to the pre- recording screen.
VideoCorder Settings
This screen allows you to adjust the video recording parameters to your personal taste.
You can access the VideoCorder Settings screen via the Settings menu item in the
Use 
/
to highlight a different parameter, then use 
/
to select a different setting.
Scheduling Parameters
•Auto Stop Rec
-Options: ON/OFF.
-If set to ON, the ARCHOS™ device will
stop recording after the duration set in the Duration parameter.
-If set to OFF, the recording will continue until you press 
or until the entire hard drive fills up.
•Duration
-The duration of time your recording will last if Auto Stop Rec is set to ON.
•Pre-record
-This is a safety margin added to the beginning of a scheduled recording which was set via the My Yahoo!® TV scheduler of your personal Yahoo!® calendar.
It affects ONLY these recordings. This is just in case the clocks between your ARCHOS™ device and the broadcast station are different or if the broadcast sta- tion starts earlier than expected.