Archos Version 2.1 user manual Recording Audio external source, Key Enter, Key Delay

Page 54

504/604 MANUAL V2.1

Optional Functionalities > p. 54

4.Test ON/OFF: When you click on the Test On/Off button, the ARCHOS™ device will send a signal to the infrared emitter and turn your device on or off. Press this test button again and your device should change from on to off or off to on. If pressing this button does not turn your device on or off, try the next code for your device (step 2 above). If none of the codes work, check that the DVR Station is positioned in a way that allows the IR signal to reach your tuner de- vice’s receiver. Note: In some rare cases the ON/OFF functionality may not work.

5.Tune channel select: These four parameters usually do not need to be set. Keep the default values to start with.

•Key: -/--

-Set this to On if normally, you have to press this same key on your device’s re- mote control in order to select a channel.

•Number of digits

-Set the number of digits that your device can recognize for a channel. Example: Set to 3 if you need to choose a channel greater than channel 99.

•Key: Enter

-Set this to On if normally, you have to press the OK button on your device’s re- mote control after you enter the channel number. Example: If you normally press 1, 3, OK for channel 13, then you would need to set this parameter to On.

•Key Delay

-Change the delay between the emission of each digit of a channel. You may need to adjust this if the ARCHOS™ device seems to send only half the digits of a channel or more digits of a channel. Example: Adjust the key delay and retest channel select if it sends channel 2 instead of 12 or sends 112 instead of 12.

8.4 Recording Audio (external source)

Connect the AV cable to an audio source (hi-fi, turntable, boombox, etc.) and then the other end to the IN connector of the DVR Station or DVR Travel Adapter.

In the Home Screen, highlight the AudioCorder icon and press OK to dis- play the pre-recording screen.

1.Highlight the Settings menu item and press OK to enter the AudioCorder settings screen (See AudioCorder Settings Screen).

2.Select ‘Analog Line-In’ as the source. Press to go back to the pre-recording screen.

3.Adjust the recording level using the left/right buttons. (/ only adjust the head- phones’ volume, not the recording volume)

4.Press OK or choose the Start recording menu item to start recording.

5.You can pause and resume your recording at any time by pressing OK.

6.Press to stop recording.

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Dear Customer Wishing you the best Multimedia experienceArchos Team Table Of Contents On Top of the Device Press and hold to switch on/off IntroductionArchos device description Built-in microphone is on the left side of the device See Using the AudioCorderPress to switch between these different screens Status BarInterface Language Resume IconBattery To replace the battery of the Archos 604, follow these stepsTo replace the battery of the Archos 504, follow these steps Product CareSee Using the Browser Playing VideoBrowsing Through Your Videos See Using the Virtual Keyboard Fast rewind Fast forward Video playbackHighlight a video file, press OK to play it Stop Pause/playVideo Settings Format Allows to change the way the image is displayed AutoPlays only one video file and stops Repeat & Shuffle a status bar icon shows the current modePutting videos onto your Archos device Plays all video files in the current folderRecording Video Playing Music Arclibrary and the music browserARCLibrary* and Music Browser Menu Items Highlight an audio file, press OK to play it Increase volume Press once next songPlaying music Accelerated fast forwardMusic Settings Over Sound SettingsPlayMode a status bar icon shows the current mode ScanHeadphones or an AV Cable Loudspeaker is always offAutomatic Playlists Repeat this operation with all the tracks you wantPlaylist Panel Menu Items Putting music onto your Archos device Synchronize your music with Windows Media PlayerRecording Audio Using the AudioCorder AudioCorder settings screenBUILT-IN Microphone Recording Procedure Line-Level recordingsViewing Photos Photo Wall and the photoLIBRARYPhoto Browser Viewing Photos Photo Settings Set as wallpaperPlaying a slideshow Viewing Photos While Listening to MusicTransferring photos to your Archos Device Using the Browser NavigationPress if you need to jump between the left and right panels Browser Menu Items Using the Virtual Keyboard Keyboard Function Keys Following Hyperlinks Computer Connection ‘Windows Media Device’ or ‘PC Hard Drive’Connection Steps Windows XP & WMP10 or Higher Windows MeDIA Device Mode Disconnection Do not Simply Pull OUT the Cable AT ANY TimeMac OS X PC Hard Drive Mode Only Setup screen Language SettingsSee Other Character Sets TV Standard Display SettingsAppearance settings TV FormatClock Settings Power Settings See The Infrared Emitter System SettingsTV control AllyUpdating the Firmware Firmware is the operating system OS of your Archos deviceDownload the AOS File Archos Operating System Activate the Update Copy the AOS File to your Archos DeviceOptional Functionalities DVR Station & DVR Travel Adapter presentationScheduling Parameters Pre-recordPost-record Video ParametersFormat Options Auto/43/53/169/2.35 Setting the Scheduler Automated Yahoo! TV Recording Scheduler Infrared Emitter Part 2 Finding the Right Emitter Codes Key Delay Recording Audio external sourceKey Enter USB Host Connection Technical Specifications ’’ TFT 480x272 pixels 16/9, over 16 millions colorsVoice recording though the built-in Microphone Optional Power charger/adapter available Approx x 78 x 16 mm 5.1 x 3.1 x Weight 250 g 8.9 ozApprox x 78 x 23 mm 5.1 x 3.1 x Weight 310 g 11 oz LCD pixel policy Technical Support information
Top Page Image Contents