TRENDnet TV-IP410W manual ID admin

Page 7

Note: By default, the IP setting on the TV-IP410/TV-IP410W is set to DHCP. Please skip to step 9. If you want to give the TV-IP410/TV-IP410W static IP address, continue on to step 5.

5.Select the camera server and click Change IP.

6.Configure the IP address to be in the same subnet as your network, type in the Administrator ID and Password and click Change.

By default:

ID: admin

Password: admin

7.Click OK and wait 30 seconds.

8. Click OK.

5

English

Image 7
Contents Quick Installation Guide Table of Contents Before You Start Package ContentsApplication Hardware Installation Go to Start Programs TRENDnet IPSetup and click IPSetup Configure the Internet CameraID admin Click Install English Click Live View Your installation is now completeQ4 When I click on Live View the image does not load? TroubleshootingCertifications Product Warranty Registration