TRENDnet TV-IP410W manual English

13.Click Setup, Network and then click Wireless. (TV-IP410W only).

14.Click Site Survey. Select your wireless network. If encryption is enabled, select the proper Authentication type, enter the Pre-Shared Key and then click apply. (Example shows WPA2-PSK. If your wireless network does not support WPA, select open or shared instead. Contact your network administrator for more information) (TV-IP410W only).

15.Disconnect the RJ-45 cable and unplug the power. Then plug the power back in (TV-IP410W).

Note: The TV-IP410W will not work wirelessly until you disconnect the Ethernet cable from the back of the camera.

7

English