Safety instructions, Safety Precautions

8a-Pro Air1200

24008a –Air

-Pro 4

Safety instructions

Safety Precautions!

Do not operate the equipment before studying the instruction manual and the accompanying safety.Make sure that Profoto Safety Instructions is always accompanied the equipment! Profoto products are intended for professional use! Generator, lamp heads and accessories are only intended for indoor photographic use. Do not place or use the equipment where it can be exposed to moisture, extreme electromagnetic fields or in areas with flammable gases or dust! Do not expose the equipment to dripping or splashing. Do not place any objects filled with liquids, such as vases, on or near the equipment. Do not expose the equipment to hasty temperature changes in humid conditions as this could lead to condensation water in the unit. Do not connect this equipment to flash equipment from other brands. Do not use flash heads without supplied protective glass covers or protective grids. Glass covers shall be changed if it has become visibly damaged to such an extent that their effectiveness is impaired, for example by cracks or deep scratches. Lamps shall be changed if they are damaged or thermally deformed. When placing a lamp into the holder ensure not to touch the bulb with bare hands. Equipment must only be serviced, modified or repaired by authorized and competent service personnel! Warning - The terminals marked with the flash symbol are hazardous live.

WARNING – Electrical Shock – High Voltage!

Mains powered generator shall always be connected to a mains socket outlet with a protective earthing connection! Only use Profoto extension cables! Do not open or disassemble generator or lamp head! Equipment operates with high voltage. Generator capacitors are electrically charged for a considerable time after being turned off. Do not touch modeling lamp or flash tube when mounting umbrella metal shaft in its reflector hole.Disconnect lamp head cable between generator and lamp head when changing modeling lamp or flash tube! The mains plug or appliance coupler is used as disconnect device. The disconnect device shall remain readily operable. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Caution – Burn Hazard – Hot Parts!

Do not touch hot parts with bare fingers! Modeling lamps, flash tubes and certain metal parts emit strong heat when used! Do not point modeling lamps or flash tubes too close to persons. All lamps may on rare occasions explode and throw out hot particles! Make sure that rated voltage for modeling lamp corresponds with technical data of user guide regarding power supply!

NOTICE – Equipment Overheating Risk

Remove transport cap from lamp head before use! Do not obstruct ventilation by placing filters, diffusing materials, etc. over inlets and outlets of the equipment ventilation or directly over glass cover, modeling lamp or flash tube!

Note about RF!

This equipment makes use of the radio spectrum and emits radio frequency energy. Proper care should be taken when the device is integrated in systems.Make sure that all specifications within this document are followed,especially those concerning operating temperature and supply voltage range.Make sure the device is operated according to local regulations.The frequency spectrum this device is using is shared with other users. Interference can not be ruled out.

Final Disposal

Equipment contains electrical and electronic components that could be harmful to the environment. Equipment may be returned to Profoto distributors free of charge for recycling according toWEEE.Follow local legal requirements for separate disposal of waste, for instance WEEE directive for electrical and electronic equipment on the European market, when product life has ended!

www.profoto.com

Pro-8a 1200 Air, Pro-8a 2400 Air specifications

The Profoto Pro-8a Air is a state-of-the-art studio flash system designed for professional photographers who require reliability and high performance during their shoots. Available in two versions, the Pro-8a 2400 Air and the Pro-8a 1200 Air, this system is renowned for its robust construction and versatility, making it an essential tool for both studio and location photography.

One of the standout features of the Pro-8a 2400 Air and Pro-8a 1200 Air is their impressive power output. The Pro-8a 2400 model offers up to 2400 watt-seconds, while the Pro-8a 1200 delivers a maximum output of 1200 watt-seconds. This high power capacity ensures photographers can achieve optimal exposure even with larger light modifiers or at greater distances.

Both models are equipped with Profoto's AirTTL technology, which allows for seamless wireless connectivity between the flash units and compatible cameras. This feature simplifies the process of adjusting settings and achieving the right exposure, particularly advantageous during dynamic shoots where quick adjustments are essential. The Air Remote and Air Sync capabilities enable photographers to control multiple light sources effortlessly, enhancing creativity and flexibility.

The Pro-8a series incorporates Advanced High-Speed Synchronization (HSS) technology, allowing photographers to shoot at shutter speeds that exceed standard flash sync speeds. This capability is particularly useful for capturing images in bright daylight or when using wide apertures to achieve that sought-after shallow depth of field.

Speed is another defining characteristic of the Pro-8a Air range. The flash duration can be as short as 1/1000 of a second, enabling photographers to freeze motion effectively, making it an excellent choice for action-packed scenarios or subjects in motion.

Durability and portability are also important to the Pro-8a series. The units are built with rugged materials, ensuring they withstand the rigors of professional use. Additionally, their lightweight design and integrated handles facilitate easy transport, whether moving between studio setups or on-location shoots.

In summary, the Profoto Pro-8a 2400 Air and Pro-8a 1200 Air stand out in the market for their exceptional power, advanced technology, and user-friendly design. With features like AirTTL, HSS, and fast flash durations, these units cater to the diverse needs of professional photographers, allowing them to push their creative boundaries while maintaining reliability in every shoot.