Date and Time
System Date and | Select the current year, month, day, hour, and |
Time | minute. |
|
|
Current Time | Displays the currently configured time zone. |
Zone |
|
|
|
Available Time | Select the time zone for your area. |
Zones |
|
|
|
Automatically | Select this if your area observes Daylight Saving |
Adjust for Daylight | Time. |
Savings Time |
|
|
|
Select the proper time zone to ensure optimal network performance of your SonicWALL Email Security appliance.
1.Click Apply Changes to save this configuration.
2.A popup will display. Click Continue to reboot the SonicWALL Email Security appliance with your new settings.
3.Disconnect the crossover cable from the SonicWALL Email Security appliance.
4.Reset your administration computer’s IP settings to work with your network. For example, if your network uses DHCP, reset your Local Area Connection to obtain an IP address and DNS settings dynamically from the server.
5.Reconnect your administration computer to your network. You will use the network to access the SonicWALL Email Security appliance in the next steps.
Alert: Your ESA 4300 is equipped with a battery backup unit on the RAID Controller Card, which allows the appliance to write volatile memory to disk in the event of a loss of power. This battery backup unit must be charged for 24 hours. When deploying your ESA 4300 appliance, follow the startup and registration instructions detailed in this document, and then allow the battery backup in the unit to charge for 24 hours. If the battery is not fully charged, some RAID features are turned off, and the appliance performance is temporarily impaired until the battery is fully charged.
SonicWALL ESA 4300 Getting Started Guide Page 13