Changing the Default Administrator Password
To protect your appliance, change the password from its default.
1.Log in to the SonicWALL Email Security appliance using the IP address you entered in Hostname and Networking - page 12.
2.Enter a new management password.
3.Navigate to the System > Administration page.
4.Enter it again in the Confirm Password field.
5.Click Apply Changes.
Using Quick Configuration to Set Up Email Management
The Quick Configuration page walks you
The information you enter for LDAP configuration is used to authenticate users as they log in to their personal Junk Boxes.
For detailed configuration instructions, refer to the SonicWALL Email Security Administrator’s Guide.
1.Navigate to the System > Administration page.
2.Click Click Here for Quick Configuration.
3.In the Quick Configuration dialog box under Network Architecture, enter the host name or IP address and the port into the Inbound destination server fields.
The inbound destination server is the email server that will accept good email after SonicWALL Email Security removes and quarantines junk email. For example, this could be the IP address of a Microsoft Exchange server. The default port is 25.
SonicWALL ESA 4300 Getting Started Guide Page 15