ERROR SIGNS

If a problem should occur while operating the CD player, one of the following error signs may be displayed. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your nearest dealer.

Message

Cause

Remedy

 

 

Dirty disc.

Clean the disc.

 

 

Scratched disc.

Replace the disc.

 

 

Up-side-down.

Check the disc.

 

 

Focus error.

Try ejecting and re-inserting

CD ERROR

 

under normal temperature

 

conditions.

 

 

 

 

 

 

 

 

 

Data and focus error.

Under normal temperature

 

 

 

conditions, eject and insert

 

 

 

clean, undamaged disc

 

 

 

properly.

 

 

 

 

MECK ERR.

Mechanical problem.

Eject and re-insert.

 

 

 

 

 

 

ERROR SIGNS (CD changer)

If a problem should occur while operating the CD changer, one of the following error signs may be dis- played. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists or “MECA ERR” and “09 ERROR” appears, contact your nearest dealer.

Message

Cause

Remedy

 

 

 

NO MAGA

No magazine.

Load the magazine in

NO DISC

No disc.

the CD changer.

 

Check the disc.

 

 

 

 

 

CD ERROR

Up-side-down.

Check the disc.

 

 

 

 

COMM ERR

Communication error

Check the connection of

the CD changer.

 

 

Excessive temperature

The error sign will go off

TEMP ERR

conditions at the CD

and play will resume

changer.

when the temperature at

 

 

 

the CD changer returns

 

 

to a normal range.

GB–18

Page 19
Image 19
Sanyo FXD-780RDS operating instructions Error Signs, CD Error, Meck ERR, Message Cause Remedy