Niles Audio CAM-DFMK manual Important Make Sure That the Image is Level

Page 8

6.Place entire assembly into hole. Figure 11

7.Turn dog screws clockwise until dogs are snug. Over-tightening dogs can keep trim ring from snapping in place. If trim ring does not snap into place, loosen screws slightly.

Figure 12

Front view

Rea

Rear view

Access holes

NOTE: ACCESS HOLES ARE PROVIDED TO LOOSEN DOGS IN CASE THEY BECOME STUCK.

8.Make provisions to view the camera image and point the camera at the desired location.

IMPORTANT: MAKE SURE THAT THE IMAGE IS LEVEL!

9.With camera properly aimed, tighten screws.

10. Align trim ring with slots in bayonnet mount. Snap in place.

11. To remove trim ring, insert small, flat screwdriver tip into one of three slots on outer edge and pry off.

Figure 13

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CAM-DFMK Page Table of Contents CongratulationsFeatures IntroductionInstallation To Install Camera Using SURFACE-MOUNT KITWiring Adjust view Tighten screwsTo Install Camera Using FLUSH-MOUNT KIT FLUSH-MOUNTImportant Make Sure That the Image is Level Niles Audio Corporation 1-800-BUY-HIFI Limited Warranty Warranty Registration Card YesL e s a u d i o C o r p o r a t i o n

CAM-DFMK specifications

Niles Audio CAM-DFMK is a state-of-the-art in-ceiling speaker system designed to deliver high-performance audio while maintaining an unobtrusive presence in any space. The CAM-DFMK is part of Niles’ extensive range of audio solutions, tailored for both residential and commercial installations. This speaker system exemplifies Niles’ commitment to quality, innovation, and user-friendly design.

One of the standout features of the CAM-DFMK is its dual voice coil design. This technology enhances the speaker's ability to deliver rich, full-range sound across various listening environments, making it ideal for multi-room audio configurations. The dual voice coil configuration allows for greater flexibility in speaker placement and audio distribution, ensuring that every corner of a room is filled with balanced sound.

The speaker is also equipped with a frequency response range that spans from 50 Hz to 20 kHz. This wide frequency range allows the CAM-DFMK to reproduce a broad spectrum of audio, from deep bass tones to sparkling highs, making it suitable for various types of music and media. The combination of quality materials and innovative engineering enables these speakers to perform exceptionally across multiple audio platforms.

Installation of the CAM-DFMK is designed to be straightforward, thanks to its Easy Install system. This feature allows for seamless integration into existing structures, and the speaker can fit a variety of ceiling types. The design incorporates a low-profile grille that can be painted to match the ceiling color, ensuring a discreet installation that blends harmoniously with the surrounding environment.

Another important characteristic of the CAM-DFMK is its durability. Built with high-quality components, the speaker is engineered to withstand the rigors of different installation environments, providing reliability over time. Whether it's for a home theater, a home gym, or a commercial setup, the CAM-DFMK is built to perform consistently under diverse conditions.

To sum up, the Niles Audio CAM-DFMK is a versatile in-ceiling speaker system that combines innovative technology with superior audio performance. With features like a dual voice coil design, wide frequency response, easy installation, and robust construction, it stands out as an exceptional choice for enhancing audio experience in both residential and commercial spaces.
Top Page Image Contents