Chapter 5
Using the QuickPan™
WHICH HOLE SHOULD I USE?
The number of click-stop positions is determined by which hole the plunger is threaded into. It is also a function of which detent wheel is mounted on the base. The standard wheel, QPD-1, is gold colored and has 8, 12, 16, 20 and 36 posi- tions. These positions correspond to the five threaded holes on the under- neath of the base, with the 8 position location being closest to the center and the 36 position location being furthest from the center.
You may also have (or wish to obtain) our QPDD-2 detent wheel. It is a light purple color and has 10, 14, 18, 24 and 30 positions. In this case, the 10 position location is closest to the center and the 30 position location is furthest.
