Kaidan QPX-2 manual Storing the Plunger and Free Rotation

Page 8

Chapter 6

Using the QuickPan™

STORING THE PLUNGER AND FREE ROTATION

You may find that you don’t want or need to use the click-stops. In this case, you can remove the spring plunger. When the plunger is removed it does not engage the holes on the detent wheel.

In this configuration, the detent wheel will spin freely, and it can be locked into any desired position by use of the Clamp knob, which protrudes from the side of the base as shown below (lower).

Page - 8

Image 8

Contents QPX-2 Copyright Information Unpacking your QuickPan Unpacking the BOXAssembling the QuickPan Attaching the Base to Your TripodUsing the QuickPan Changing the Increment Rotation AngleAdjusting the Spring Force of the Plunger Which Hole should I USE? Storing the Plunger and Free Rotation Attaching the Camera Bracket Final HOW do I Locate MY CAMERA’S Nodal POINT? Level the Camera Easy Part the SIDE-TO-SIDE AdjustmentSlightly Harder Part FORE-AFT Adjustment Record Your Results HOW about Rangefinder CAMERAS? Taking the Photos HOW Much OVERLAP?HOW Many SHOTS? Taking the Photos