Ikelite instruction manual Ikelite Video Case, E P a R a T IO N, #6038.91Sony HDR SR5

IKELITE VIDEO CASE

SUPPLEMENTAL INSTRUCTIONS FOR

#6038.91Sony HDR SR5

Thissupplementalsetofinstructionsdescribesadditionalfeaturesspecific toyourhousingmodel.Priortotestingthesysteminthewater,pleaseread thissupplementalongwiththegeneralinstructionmanualtobecomefamiliar withitsfeaturesandfunctions.

IkeliteVideoCasesareslightlynegativeinsaltwaterforstability.This housinghasbeenwaterpressuretestedatthefactoryandhasaworking depthof60m(200').

HOUSING CONTROLS________________		Power
	Power Zoom	Lid Snap
• Power On/Off / Mode
• Start/Stop	Port	Touch
• Snap Shot	Mirror	Pad
• Power Zoom
• Photo		T. P.
• LCD Screen Control #1		Bottom Bar
• LCD Screen Control #2
• LCD Screen Control #3	Base
• LCD Reversing Circuit On/Off
• Display Batt Info	Snap Shot	for Reverse
• Touch Pad Controls
		On/Off
		Circuit
MAIN O-RING #0109_________________	Stop
O-rings last several y ears if properly	Start/
maintained. Control seals sh ould not need to
be replaced as long as the control shafts are
kept clean and lightl y lubricated.

P R E P A R A T IO N
PACKAGED WITH HOUSING__________________________________________________
• External UR/Pro Color Filter
• Internal Lens Shade
• Silicone Lubricant
COLOR FILTER_____________________________________
The installation and usage of the external UR/Pro
color filter is described in the general instruction manual.
LENS SHADE_______________________________________
The internal lens shade helps block light reflection/
refraction caused by the interaction of the external color
filter and the port.	External	Internal
Carefully thread the lens shade on the front of the	Color Filter	Lens Shade

camera lens. The lens threads are very fine; DO NOT cross thread. It should screw on very easily. If it is difficult to turn, you are cross threading.

Completely thread the lens shade into the camera to avoid any p otential clearance or sealing problems when the camera is in stalled and the housing is se aled.

LCD MONITOR / EXTERNAL MIRROR_________________________________________

The camera's LCD monitor can be viewed from the rear of th e housing, using th e external mirror featured on the side of the housing.

Open the LCD monitor on the camera, rotate 180°, and then press it back against the side of the camera. The external mirror is hinged so that it can be opened to reflect the image from the camera's LCD monitor for viewing from the rear of the housing.

During transportation, please remember to close the mirror by pressing it aga inst the side of the housing or lid snap.

BATTERY AND TAPE__________________________________________________________

Install a fully charged Sony battery on the camera:

Sony NP-FH50, NP-FH60, NP-FH70

Other brand batteries may not fit inside the housing.

Make sure you have loaded an appropriate digital cassette tape in the camera. OPTIONAL WIDE ANGLE LENS_______________________________________________

The housing’s port accepts optional 67mm threaded waterproof Wide-Angle lenses such as the Ikelite #6420 W-20, Epoque DCL-20 and Inon UWL-100 Type 2. These waterproof lenses secure to the outside of the lens port.

Should you elect to use an optional waterproof lens, carefully thread the lens on the front of the lens port on the housing. The lens threads are very fine; DO NOT cross thread. It should screw on very easily. If it is difficult to turn, you are cross threading. INTERNAL WIDE-ANGLE LENS OPTION ________________________________________

Special ports are available for use with the Raynox HD -5050 Pro high definition wide-angle lens. optional ports sold separately as dome port #9304 or f lat lens port #9304.1.Raynox HD-5050 Pro lens not included. Lens not available for purchase through Ikelite.