Note: To save changes, you must press APPLY.
Motion Detect
Click [Main→Device→Motion] to enter into the MOTION
DETECT menu to setup motion detection recording.
STATUS: Turn ON or OFF motion detection for each channel.
SENSITIVITY: Set each channel’s sensitivity level of motion detection from 1 to 4
with 4 being the most sensitive.
MD AREA: This option allows you select the area you want to be sensitive to motion. A new window displays with a grid separated into a 13 by 10 block area. Select areas in red where motion detection is desired. When any object moves into the motion detection area, (the red areas of the grid) recording will be triggered. In the shaded area the motion detection is off.
SKU 68332 | For technical questions, please call | Page: 17 |