Harbor Freight Tools 68332 manual PTZ Setup Pan/Tilt/Zoom, Mobile

Page 19

Note: To save changes, you must press APPLY.

PTZ Setup (Pan/Tilt/Zoom)

(PTZ cameras not included)

Click [Main Menu→Device→ PTZ Setup] to enter the PTZ Setup menu.

Select the channel you want to control and set PTZ protocol (Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800, 9600), Stop bit (1, 2), Parity Check (None, Odd, Even Mark Space), and Address Code.

Note: The above mentioned channel settings must match the settings of the PTZ camera.

Set CRUISE to ON to enter the sub menus that adjust the individual camera settings.

Click Z+&Z- keys to zoom In or out, click F+&F- keys to control camera focus and click I+&I- to adjust iris.

CRUISE SETUP

Click CRUISE SET to open the auto cruise function window if you want to adjust the cruise function. The system default is ON.

CH#: Select the channel number with the PTZ camera

TOTAL: Enter presetting bit quantity.

CUR POINT: System has default starting (current) cruise point as 01. You can use this option to set additional cruise points.

STOP TIME: Adjust the pause time at each stop.

GOTO: Select this option to go to specific preset points.

SET: Saves the preset point. After setting channel and setting the position by adjusting PTZ direction key click SET to setup the pre-set point. Please note you need to click SAVE to finish the setup successfully. If you want to combine Zoom, Iris, Focus and direction keys into the pre-set setting, return to previous menu to add additional settings, and then enter into Cruise Set again and click SET and SAVE to make sure your setting is setup successfully.

CLEAN: Removes settings.

Note: This DVR model supports up to 100 pre- set points. But actual quantities may be restricted by the PTZ camera you are using.

Mobile

Click [Main menu→Device→Mobile] to enter into [Mobile] menu.

USER NAME: Enter the user name of the DVR.

USER PASSWORD: Enter the user password of the DVR.

SERVER PORT: Enter the mobile monitoring port. Setting range is between 1024 and 65535.

Note: Connect the DVR to the Internet before setting the DVR port number and the server port number. Consult your mobile provider for additional information.

SKU 68332

For technical questions, please call 1-800-444-3353

Page: 16

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Record Product’s Serial Number Here Smart Phone Compatible DVR Security SystemNTSC/PAL SpecificationsSContents Save This Manual Safety WarningsSee Table a GroundingProng Plug and Outlet Outlets for 2-Prong Plug100’ 150’ At full load 120/240 VoltSetup Overview FeaturesIntroduction Components and Controls ComponentsFront Panel Remote ControlBack Panel Connector Set upCable Connections Entering the Main Menu System InitializationMain Interface DVR ControlsDevices System Main MenuPrivacy Zone Camera Setup Channel Title, Position, Live DisplayColor Setup Image Brightness, Saturation, Contrast, Hue Autoseq Image Auto Cycle FunctionRecord Schedule Record Setup Resolution, Quality, Audio, Record TimeDVR Recording Time PPPoE Network SetupStatic Addresses HDD Management Device ManagementMenu Descriptions Email Alarm Notification Alarm SetMobile PTZ Setup Pan/Tilt/ZoomMotion Detect Password Time SetupSystem Function Language Video SetupInformation Menu Lock System MaintenanceNavigating the Menu List Basic OperationTo Search by File Recorded Video Search and PlaybackVideo Search To Search by DateRecording File Backup Playback Program Using PlaybackPlayback Menu Controls Playback SettingsNet-Viewer Program Main Screen Controls Live ModeMain Log-in Screen Log-in to Net-ViewerRecord Replay ModeSetup Mode ControlsPTZ Control AlarmNetwork Host Information SettingProblem Possible Causes Likely Solutions TroubleshootingWarranties Limited 90 DAY WarrantySKU Mission Oaks Blvd. PO Box 6009 Camarillo, CA 91302 800 Trademark Acknowledgements
Top Page Image Contents