Zenoah BCZ3001S manual Set up

English

6. Set up

SE1

[BCZ3001S] [BCZ3001S-CA]

(1)

[BCZ3001SW] [BCZ3001SW-CA]

IMPORTANT

Tighten the screws gradually by turns.

■INSTALLING HANDLE

•Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. (SE1)

(1)About 19 inches (48cm)

(2)About 14.5 inches (37cm)

■HIP PAD

• Fix the tube by the band. (SE2)

SE2

(1)

SE3
	(1)	(2)
[BCZ3001S]	[BCZ3001SW]
[BCZ3001S-CA]
	[BCZ3001SW-CA]
SE4

SE5

(1) Band

■INSTALLING CUTTING ATTACHMENT GUARD

•Put the cutting attachment guard on the braket, attach it with the 2 screws. (SE3)

IMPORTANT

2 kinds of cutting attachment guard are packed in with BCZ3001SW/BCZ3001SW-CA. Choose the guard suitable for a line head. If the right guard is not used, it may lead to a serious accident. (SE3)

(1)Guard for Line Head (Red) : (T3245-24110)

(2)Guard for Blade (Black) : (T3246-24110)

■INSTALLING LINE HEAD (SE4)

1.While locking the gear shaft, by inserting the supplied tool into the upper holder on the gear box, loosen and remove the hexagon nut(left-handed)

2.Fit the line head assembly to the gear shaft over the holders. Hand-tighten it securely.

IMPORTANT

You need not holder (B) and nut when installing the line head.

■BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head just touching on the ground. (SE5)

20