Diffuser and Deflector, Lens Port, Substrobe DS51

Diffuser and Deflector cont.

A diffuser and deflector are Diffuser/Deflector material included with the housing. The

diffuser is white transparent plastic. The deflector is also white but is not transparent.

To install the diffuser or	Port Clamp
deflector spread the port clamp
at the spring end and slide over	Spring
the lens port. The white plastic
should be placed in front of the
camera flash. The port clamp
should be pushed back against	Spread to Install
the front of the housing.

Diffuser

The diffuser should be installed when using the camera’s built in flash. When shooting with the camera’s built-in flash at approximately 2 feet (0.6 m) or less, the lens port on the housing may block a portion of the light from the camera’s built-in flash, creating a shadow in the lower left of the photo. If this occurs, zoom the lens slightly to eliminate the shadow. (You can test this above water)

Deflector

The deflector should be installed when using an external strobe such as the DS51 or DS125 Substrobe and EV Controller. The deflector will redirect the camera’s flash to the EV Controller which controls the external strobes output.

Optional Accessories

Back o-ring #0109

O-rings last for several years if properly maintained. (See maintenance) Always carry a spare in case o-ring becomes damaged or lost.

Wide-Angle Adapter #9306.80

Required to mount Inon UWL-150AD Bayonet style wide-angle lens. Wide-Angle Adapter #9306.81

Required to mount Ikelite W-20 and other Screw Thread (67mm) style wide-angle lenses.

UR/Pro Filter (Blue Water) #6441.32

The UR/Pro underwater color correcting filter is designed to restore some of the warm colors filtered out by the water. For available light use only, not recommended for use with flash.

Green Water Filter #6441.72

Enhances contrast and alters the color of green water to give our subject a rich, natural tone. For available light only, not recommended for use with flash.

Tray with Release Handle #9523.31 Tray and Release Handle is required to mount external Substrobes.

Ikelite W-20 Wide-Angle Lens #6420

Wide-Angle lenses allow you to capture more of the scene and get closer to your subject which results in clearer images and more vivid color. Can be installed or removed underwater for maximum versatility. (Note: some housings may require an adapter, see instructions.) 11

Lens Port

Treat the glass in the lens port as a camera lens. After use, rinse and gently dry the lens port to avoid water spotting. To clean use a mild soap solution or lens cleaner.

Do not use alcohol or window cleaner on the Lens Port.

The Lens Port will accept (2) Wide-Angle Adapters. The Wide-
Angle Adapter #9306.80 which is required to mount the Inon
UWL-150AD Bayonet style wide-angle lens. The Wide-Angle
Adapter #9306.81 is required to mount the #6420 Ikelite W-20
Wide-Angle Lens and other manufacturers (67mm) screw
thread style wide-angle lenses.
These lenses can be secured onto the Wide-Angle Adapter
above or below water as they are designed to have water
between the front of the port and the accessory lens. Make sure
no air bubbles are trapped between the port and the accessory
lens. Any vignetting that occurs can be eliminated by zooming
the camera lens slightly. The camera’s built-in flash cannot be
used with wide angle
lenses. The front of the	Wide-Angle Adapter
lenses are so large they
block the camera’s flash.	Wide-Angle Lens
To properly light subjects
when using a wide angle
lens an external strobe
should be used. Due to

the wide-angle of coverage of these lenses, the DS125 Substrobe is recommended or two DS51 Substrobes.

Optional Accessories Continued

Substrobe

DS125

Substrobe

DS51

SA-100Q

Arm

SA-100Q

Arm

EV Controller

	EV Controller
Substrobe DS51
		Substrobe DS125
The Substrobe DS51 covers the		The Substrobe DS125 covers
equivalent of a 28mm lens. It is		the equivalent of a 18mm
the ideal choice when using		lens, 100 degrees. It is the
only the camera lens or the		ideal choice when using
camera lens with a macro		accessory wide angle lenses
accessory lens.	12	greater than 28mm.

6184.7 specifications

The Ikelite 6184.7 is a highly regarded underwater camera housing designed specifically for the Canon EOS R mirrorless camera system. This housing is known for its robust construction, innovative features, and user-friendly design, making it an excellent choice for both amateur and professional underwater photographers.

One of the standout features of the Ikelite 6184.7 is its durable construction. Made from lightweight yet sturdy ABS polycarbonate, the housing provides excellent protection against the harsh underwater environment. It is designed to resist corrosion and withstand significant water pressure, making it suitable for depths of up to 60 meters (200 feet). This durability ensures that photographers can focus on capturing stunning underwater images without worrying about their equipment.

The housing is equipped with a clear back to provide a full view of the camera controls and status while allowing users to monitor their camera settings easily. The design includes precise cutouts for buttons, allowing for comfortable access to essential controls without the need to remove the housing. This feature is particularly beneficial in dynamic underwater environments, where adjusting settings quickly can be crucial.

Another significant aspect of the Ikelite 6184.7 is its compatibility with a range of lenses. Designed to accommodate Canon's full-frame RF lenses, photographers have the flexibility to choose from a variety of optical options to suit their shooting style. Furthermore, the housing supports the use of dedicated ports, giving users the choice to use different lens types, including wide-angle and macro lenses, to capture stunning close-ups or expansive underwater scenes.

For enhanced underwater imaging, the Ikelite 6184.7 supports the use of powerful external strobes and lighting systems. It features dual removable flash sync connectors, making it easy to connect and synchronize with Ikelite’s popular strobe lights. This capability allows photographers to achieve superior lighting and color balance in their underwater photographs, resulting in more vibrant and lifelike images.

In addition to its functional features, the Ikelite 6184.7 is designed with an intuitive interface, making it suitable for photographers of all skill levels. The housing is lightweight and compact, which facilitates easy handling underwater. Overall, the Ikelite 6184.7 is an exceptional housing option for Canon EOS R users seeking to explore the captivating world beneath the waves. With its blend of durability, versatility, and user-friendly design, it stands out as a favorite among underwater imaging enthusiasts.