Samsung HMX-Q10UN, HMX-Q10TN Lightning, If the Camcorder has been exposed to rain or water

Important safety instructions

21.LIGHTNING:

For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and powerline surges.

22.POWER LINES:

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

a.When the power-supply cord or plug is damaged.

b.If any liquid has been spilled onto, or objects have fallen into the

CAMCORDER.

c.If the CAMCORDER has been exposed to rain or water.

d.If the CAMCORDER does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the CAMCORDER to its normal operation.

e.If the CAMCORDER has been dropped or the cabinet has been damaged.

f.When the CAMCORDER exhibits a distinct change in performance, this indicates a need for service.

23.OVERLOADING:

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

24.OBJECTS AND LIQUIDS:

Never push objects of any kind into this CAMCORDER through openings as they may touch dangerous voltage points or short out a part that could result in a fire or electric shock. Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug unit and have it checked by a technician before use.

25.SERVICING:

Do not attempt to service this CAMCORDER yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

26.DAMAGE REQUIRING SERVICE:

ivUnplug this CAMCORDER from the wall outlet and refer servicing to qualified service personnel under the following conditions:

27.REPLACEMENT PARTS:

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

28.SAFETY CHECK:

Upon completion of any service or repairs to this CAMCORDER, ask the service technician to perform safety checks to determine that the CAMCORDER is in safe operating order.

29.To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture.

30.If this power supply is used at 240V ac, a suitable plug adaptor should be used.