ENGLISH
Maintenance
Cleaning the Video Heads
✤To ensure normal recording and clear pictures, clean the video heads.
✤When the playback pictures are noisy or hardly visible, the video heads may be dirty.
a. | Normal Picture | a | b | c |
b, c. | Noisy Picture |
|
|
|
| If this happens, clean the video heads |
|
|
|
| with a dry type cassette cleaner. |
|
|
|
1.Set the power switch to PLAYER mode.
2.Insert the cleaning tape.
3.Press the (PLAY/STILL) button.
4.Press the ■ (STOP) button after about 30 seconds.
Check the quality of the picture using a known good video cassette.
If it is still bad, repeat the operation.
If the problem continues, contact your local authorized service centre.
Storing the Camcorder
1. | You must detach the BATTERY PACK from | 1 | 2 |
| the camcorder when not in use. | ||
|
|
| |
2. | Keep the camcorder in a ventilated, |
|
|
| dry/warm place. |
|
|
3. | Store the camcorder were temperature | 3 | 4 |
| changes will be minimal. (avoid places such | ||
|
|
|
as a garage, loft space or car.)
4. Store the camcorder on a stable surface.
54