ENGLISH
Troubleshooting Check
Troubleshooting Check
✤Before contacting a service centre, perform the following simple checks. They might save you the time and the expense of an unnecessary call.
Self Diagnosis Display
Display | Blinking | Inform that... | Action |
|
|
|
|
| slow | the battery pack is almost | Exchange it with a charged |
|
| discharged. | one. |
|
|
|
|
| fast | the battery pack is fully | Exchange it with a charged |
|
| discharged. | battery. |
|
|
|
|
TAPE END | slow | the tape has almost reached | Prepare a new one. |
|
| its end. |
|
|
|
|
|
TAPE END | no | the tape reached its end. | Change to a new one. |
|
|
|
|
TAPE | slow | there is no tape in the camcorder. | Insert a tape. |
|
|
|
|
TAPE | slow | the tape is protected | Check the red tab, |
|
| from recording. | on the tape. |
|
|
|
|
D.EMG | slow | the camcorder has some | 1. Eject the tape. |
C.EMG |
| mechanical fault. | 2. Set to OFF |
R.EMG |
|
| 3. Detach the battery. |
L.EMG |
|
| 4. Reattach the battery. |
|
|
| * Please contact your local service |
|
|
| center if the problem continues. |
|
|
|
|
DEW | slow | moisture condensation | see page 59. |
|
| has formed in the camcorder. |
|
|
|
|
|
56 |
|
|
|