ENGLISH
Advanced Recording
●DATE/TIME
✤The DATE/TIME function works in CAM, VCR, M.REC and M.PLAY modes.
✤The date and time are automatically recorded on a special data area of the tape.
✤You can choose to display - the OFF, DATE, TIME, DATE/TIME
■OFF only
■DATE only
■TIME only
■DATE & TIME
1.Press the MENU button.
■ The menu list will appear.
2.Turn the MENU DIAL to highlight VIEWER and push the MENU DIAL.
3.Turn the MENU DIAL to highlight DATE/TIME.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER 
LCD ADJUST
DATE / TIME 
TV DISPLAY
4.Push the MENU DIAL to select the
5.Using the MENU DIAL, select the DATE/TIME mode.
■To return to the previous menu, place the cur- sor on the return icon located at the lower part of the menu and Push the MENU DIAL.
6.To exit, press the MENU button.
Reference 
■The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
■The DATE/TIME will read “- -
-During playback of a blank section of a tape.
-If the tape was recorded before setting the DATE/TIME in the Camera’s memory.
-When the battery becomes weak or dead.
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME 
DATE&TIME
52